Engineered for extreme environments, this M24x145mm Hex Head Cap Screw is forged from premium Titanium Grade 5. Offering exceptional strength-to-weight ratio and unparalleled corrosion resistance, it ensures reliable fastening in critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M24 |
| Length | 145mm |
| Head Width | 21mm |
A high-performance industrial component, this M24x145mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), a dual-phase alloy renowned for its exceptional strength (tensile strength typically 895 MPa) and low density (approx. 4.43 g/cm��). The M24 metric thread provides robust load-bearing capacity, while the 145mm length offers significant grip and engagement. The 21mm hex head width ensures a secure fit with standard tooling, facilitating controlled torque application. Its inherent biocompatibility and resistance to saltwater, chlorides, and various acids make it ideal for aerospace, marine, chemical processing, and medical device manufacturing where material integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the tapped hole or nut thoroughly to remove any debris or lubricant. 2. Apply a small amount of anti-seize compound to the threads to prevent galling, especially in titanium-to-titanium connections. 3. Thread the cap screw by hand to ensure proper engagement and avoid cross-threading. 4. Using a calibrated torque wrench, tighten the screw to the manufacturer's recommended torque specification for the specific joint and material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force without a torque wrench, leading to over-tightening and potential thread stripping or component damage. | Always use a calibrated torque wrench and adhere to the specified torque values for the application. |
| Failure to clean threads, resulting in galling and difficulty in achieving proper torque or permanent seizure. | Thoroughly clean both the screw and mating threads before installation. |
| Applying torque unevenly across multiple fasteners in a joint, leading to uneven stress distribution and potential failure. | Follow a star or circular tightening pattern when fastening multiple screws in a single component. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components and engine assemblies, Marine hardware, exhaust systems, and offshore equipment, Chemical processing equipment and pipelines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||