This M24x132mm Hex Head Cap Screw, crafted from Aluminum 6061, offers a superior balance of strength and lightweight design for critical fastening solutions.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Size | M24 |
| Length | 132mm |
| Head Width | 15mm |
Engineered for reliability and performance, this M24x132mm Hex Head Cap Screw is manufactured from high-strength Aluminum 6061 alloy, renowned for its excellent corrosion resistance and machinability. The M24 thread provides robust load-bearing capabilities, while the 132mm length ensures adequate grip for thicker materials. The 15mm head width facilitates secure tightening with standard tooling, making it ideal for applications where weight reduction and material integrity are paramount. Its superior strength-to-weight ratio makes it a preferred choice in aerospace, automotive, and marine environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the screw to verify proper engagement and alignment. 3. Tighten using a calibrated torque wrench to the specified torque value for the application, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to thread stripping or material deformation. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Aluminum 6061 fasteners. |
| Cross-threading the fastener during installation. | Initiate threading by hand to ensure proper alignment before applying any tool torque. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive interior and exterior trim, Marine hardware and deck fittings, Lightweight industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||