This M24 x 30mm Hex Head Cap Screw, fabricated from premium 304 stainless steel, provides exceptional strength and superior corrosion resistance for critical fastening applications in harsh environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Size | M24 |
| Length | 30mm |
| Head Width | 35mm |
A high-performance industrial component, this M24 x 30mm Hex Head Cap Screw is engineered for robust structural integrity and long-term durability. Constructed from grade 304 stainless steel, it offers excellent resistance to a wide range of corrosive media, including atmospheric conditions, many organic and inorganic chemicals, and food processing environments. The M24 metric thread size ensures substantial load-bearing capacity, while the 30mm nominal length provides adequate engagement for various assembly requirements. The precisely machined head, with a 35mm width, allows for secure torque application using standard hex wrenches or impact tools, facilitating efficient installation and reliable fastening in demanding sectors such as marine, chemical processing, food and beverage, and general manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Hand-thread the screw to confirm proper alignment and avoid cross-threading. 3. Apply specified torque using an appropriate calibrated torque wrench or impact driver.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect torque, leading to under-tightening or over-tightening. | Always consult torque charts for the specific application and material, and use a calibrated torque wrench. |
| Cross-threading the fastener due to misalignment. | Start threading by hand for several turns to ensure proper engagement before applying tools. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Structural assembly in corrosive environments, Marine and offshore equipment, Food processing machinery and infrastructure, Chemical plant installations, General industrial fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||