This M24 x 16mm Hex Head Cap Screw, crafted from high-performance polycarbonate, offers exceptional chemical resistance and electrical insulation. Its lightweight yet robust design makes it ideal for demanding non-metallic fastening applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Size | M24 |
| Length | 16mm |
| Head Width | 8mm |
Precision-manufactured to tight tolerances, this M24 x 16mm Hex Head Cap Screw boasts a nominal diameter of M24 and a length of 16mm, with a head width of 8mm. Constructed from virgin polycarbonate, it exhibits superior impact strength, excellent UV resistance, and a high dielectric strength, making it a non-conductive and corrosion-proof alternative to metal fasteners. Its operating temperature range is optimized for typical industrial environments. The hex head design facilitates secure tightening with standard tools.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw to engage initial threads, verifying smooth engagement. 3. Utilize a suitable hex driver to tighten to the specified torque, avoiding overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the polycarbonate screw, leading to thread stripping or head deformation. | Use a torque wrench set to the recommended value for polycarbonate fasteners. Do not exceed manufacturer-specified torque limits. |
| Using excessive force with power tools, which can damage the screw or the mating material. | Employ hand tools or low-speed, low-torque power tools specifically designed for plastic fasteners. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment mounting, Corrosion-resistant assemblies in chemical environments, Lightweight structural components where conductivity is undesirable.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||