Engineered from high-performance polycarbonate, this M24 x 127mm hex head cap screw offers exceptional impact resistance and chemical inertness. Ideal for environments where metal corrosion is a concern.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Size | M24 |
| Length | 127mm |
| Head Width | 10mm |
Precision-manufactured to tight tolerances, this M24 x 127mm polycarbonate hex head cap screw features a nominal diameter of 24mm and a thread length of 127mm. The head width is a controlled 10mm, ensuring compatibility with standard tooling. Polycarbonate provides excellent tensile strength and a high service temperature range, making it suitable for applications requiring robust, non-conductive, and corrosion-proof fastening solutions. Its inherent UV resistance further enhances durability in exposed environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw to verify alignment and prevent cross-threading. 3. Use a calibrated torque wrench with an appropriate socket to tighten to the specified torque value, avoiding over-tightening which can damage the polycarbonate material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to material deformation or cracking. | Always use a torque wrench and adhere to the manufacturer's recommended torque specifications for polycarbonate fasteners. |
| Using excessive force or impact tools which can compromise the structural integrity of the polycarbonate. | Employ hand tools or low-speed electric screwdrivers with torque control for installation. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Chemical processing equipment, Water treatment facilities, Electrical enclosures and insulation, Marine applications, Medical device assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||