Engineered for reliable performance in corrosive and demanding environments, this M24 x 127mm Nylon Hex Head Cap Screw offers exceptional strength-to-weight ratio and dielectric properties.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M24 |
| Length | 127mm |
| Head Width | 31mm |
Built to exacting engineering tolerances, this M24 x 127mm (1/2" nominal thread diameter, 5" nominal length) hex head cap screw features a 31mm (1.22" nominal) head width. Constructed from high-performance nylon, it exhibits excellent chemical resistance to a wide range of solvents, bases, and oils, and provides superior electrical insulation. Its robust design ensures secure fastening in applications where weight and corrosion are critical considerations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with a threaded hole or nut. 2. Hand-thread the cap screw to engage the threads, ensuring no cross-threading. 3. Use a properly sized hex driver or wrench to tighten the screw to the required torque, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, which can strip threads or damage the nylon material. | Tighten to the manufacturer's recommended torque specification or until snug, then apply a slight additional turn if necessary. Consider using a torque wrench for accuracy. |
| Using the wrong size tool, leading to damage of the hex head. | Ensure the hex driver or wrench fits snugly into the hex recess of the cap screw head to prevent cam-out and stripping. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment mounting, Corrosive chemical processing environments, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||