This M24 x 117mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and electrical insulation. Engineered for secure fastening in demanding environments where metal fasteners are unsuitable.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M24 |
| Length | 117mm |
| Head Width | 26mm |
Built to exacting engineering tolerances, this M24 x 117mm Hex Head Cap Screw is manufactured from high-performance Nylon, offering superior dielectric strength, chemical resistance, and a lightweight profile. The robust head design provides a 26mm width for optimal torque application with standard tooling. Its non-magnetic properties and low friction coefficient make it ideal for applications in sensitive electronics, medical equipment, and corrosive industrial settings. The precise M24 thread ensures reliable engagement with corresponding nuts and tapped holes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Insert screw, engaging threads carefully by hand to prevent cross-threading. 3. Tighten screw using an appropriate wrench or socket to the specified torque, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the nylon fastener by forcing it onto misaligned threads. | Always start thread engagement by hand for at least two full turns before applying any tool torque. |
| Over-tightening the nylon screw, leading to thread stripping or head deformation. | Refer to torque specifications for nylon fasteners or use a torque-limiting tool to achieve proper clamping force without damage. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation in switchgear and control panels, Corrosion-resistant assembly in chemical processing plants, Lightweight fastening in aerospace and automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||