This M24 x 115mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and a lightweight profile, making it ideal for demanding environments and sensitive assemblies. Its non-conductive properties ensure electrical insulation.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M24 |
| Length | 115mm |
| Head Width | 9mm |
Specified by design engineers worldwide, this M24 x 115mm Nylon Hex Head Cap Screw is manufactured from high-performance polyamide (nylon) for superior chemical resistance, dielectric strength, and a wide operating temperature range. The M24 nominal diameter combined with a 115mm length and a 9mm head width provides robust fastening capabilities. Its inherent lubricity reduces friction during installation and prevents galling, while its non-magnetic nature is critical for sensitive electronic applications. Tensile strength and load-bearing capacities are suitable for various moderate-duty structural and non-structural connections.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-tighten the screw to engage threads properly. 3. Use an appropriate wrench or socket to tighten to the required torque, avoiding over-tightening which can damage the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M24 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M24 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening leading to thread stripping or head deformation. | Utilize a torque wrench set to the recommended value for nylon fasteners to prevent damage. |
| Using in applications exceeding the chemical resistance or temperature limits of nylon. | Verify the compatibility of nylon with the specific chemicals and operating temperatures of the intended application. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation and grounding components, Chemical processing equipment assembly, Lightweight structural and panel fastening, Medical device manufacturing, Automotive interior and exterior components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||