This M23 x 74mm Nylon Hex Head Cap Screw offers a robust and lightweight fastening solution. Engineered for demanding industrial environments, it provides excellent chemical resistance and electrical insulation.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M23 |
| Length | 74mm |
| Head Width | 32mm |
A proven choice for industrial professionals, this M23 x 74mm Nylon Hex Head Cap Screw boasts a head width of 32mm, ensuring secure torque application. Constructed from high-grade nylon, it delivers exceptional dielectric strength, resistance to common solvents and acids, and a wide operating temperature range. Its non-conductive properties make it ideal for electrical assemblies, control panels, and environments where corrosion or galvanic reactions are a concern. This fastener is designed for long-term performance in corrosive or moisture-rich settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Insert the M23 Nylon Hex Head Cap Screw through the aligned holes. 3. Tighten using an appropriate socket wrench or hex driver to the recommended torque for nylon fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or head fracture. | Utilize a torque wrench and adhere to the specific torque recommendations for nylon fasteners to prevent damage. |
| Using the screw in an application exceeding its temperature or chemical resistance limits. | Verify the material compatibility and operating temperature range of the nylon screw against the specific application requirements. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control systems, Corrosive chemical processing equipment, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||