This M23x73mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its robust polymer construction ensures durability in demanding industrial environments, providing a reliable fastening solution.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M23 |
| Length | 73mm |
| Head Width | 32mm |
Purpose-built for heavy-duty applications, this M23x73mm Nylon Hex Head Cap Screw features a nominal diameter of M23 and a total length of 73mm. The hex head measures a substantial 32mm across the flats, enabling high torque application with standard tooling. Constructed from a high-performance engineering nylon, it exhibits exceptional resistance to chemicals, solvents, and moisture, making it ideal for corrosive environments where metal fasteners would degrade. Its non-conductive properties are critical for electrical isolation and preventing galvanic corrosion. The tensile strength of this nylon screw, while lower than steel, is optimized for applications where weight reduction and chemical inertness are paramount. Typical applications include marine hardware, chemical processing equipment, electrical enclosures, and outdoor structural assemblies requiring long-term reliability and minimal maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating hole and ensure it is clean and free from debris. 2. Insert the M23x73mm Nylon Hex Head Cap Screw into the desired location. 3. Tighten the screw using a standard metric hex wrench or socket, applying consistent torque as specified by the application's design parameters. Avoid over-tightening to prevent stripping or damaging the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to thread stripping or head deformation. | Apply torque gradually and within the recommended limits for nylon fasteners. Utilize a torque wrench for precise control, especially in critical applications. |
| Exposing the nylon screw to temperatures exceeding its operational limit, causing material degradation. | Verify the maximum operating temperature of the nylon material and ensure the application environment remains within these specified limits. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical Processing Equipment, Electrical Enclosures and Assemblies, Marine and Coastal Hardware, Automotive and Transportation Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||