This M23x62mm Nylon Hex Head Cap Screw provides superior corrosion resistance and electrical insulation. Its robust nylon construction ensures reliability in demanding environments, offering a lightweight and non-magnetic fastening solution.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M23 |
| Length | 62mm |
| Head Width | 14mm |
Engineered for reliability and performance, this M23x62mm Nylon Hex Head Cap Screw offers excellent chemical resistance and a broad operating temperature range. Constructed from high-strength nylon, it exhibits superior dielectric properties and is ideal for applications where galvanic corrosion is a concern. The M23 thread standard ensures secure mating with standard nuts and tapped holes, while the 14mm head width allows for effective torque application with standard hex tools. Its non-magnetic nature makes it suitable for sensitive electronic assemblies and medical equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the cap screw to engage threads properly. 3. Use a suitable hex wrench to tighten to the recommended torque specification, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can strip threads or cause material fatigue. | Always refer to torque charts for nylon fasteners or use a torque-limiting wrench. For M23, a conservative approach is advised. |
| Using the screw in an application exceeding its temperature or chemical resistance limits. | Verify the chemical compatibility and temperature range of nylon for your specific operating environment before deployment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electronic enclosures and assemblies, Chemical processing equipment, Automotive interior components, Medical devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||