Engineered for demanding industrial environments, this M23x59mm brass hex head cap screw offers exceptional corrosion resistance and reliable performance. Its robust design ensures secure fastening in a wide range of applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M23 |
| Length | 59mm |
| Head Width | 19mm |
A proven choice for industrial professionals, this M23x59mm hex head cap screw is manufactured from high-grade brass, renowned for its excellent corrosion resistance, particularly in marine and chemical environments. The M23 thread size ensures substantial load-bearing capacity, while the 59mm length provides ample engagement for various assembly thicknesses. The 19mm head width is optimized for standard socket wrenches, allowing for efficient installation and removal. Brass's inherent non-magnetic properties and good electrical conductivity also make it suitable for specific specialized applications where these characteristics are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the cap screw to verify alignment and prevent cross-threading. 3. Tighten to the specified torque using an appropriately sized socket wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the brass screw, which can strip the threads. | Use a torque wrench and adhere to recommended torque values for brass fasteners. |
| Using the wrong size socket, leading to head damage. | Always use a socket that precisely fits the 19mm hex head. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Chemical processing equipment, Electrical grounding components, Architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||