This M23x144mm Hex Head Cap Screw, manufactured from high-strength Aluminum 6061, provides exceptional corrosion resistance and a lightweight fastening solution for critical applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M23 |
| Length | 144mm |
| Head Width | 19mm |
Trusted by engineers across multiple sectors, this M23x144mm Hex Head Cap Screw is crafted from Aluminum 6061-T6 alloy, offering a superior strength-to-weight ratio and excellent resistance to corrosion and fatigue. The M23 nominal diameter and 144mm length, combined with a 19mm head width, ensure robust joint integrity and compatibility with standard tooling. Its inherent non-magnetic properties and good thermal conductivity make it ideal for environments where these characteristics are paramount, such as aerospace, marine, and electrical assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-tighten the cap screw to engage all threads. 3. Torque to manufacturer's specified value using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the fastener, leading to thread stripping or component damage. | Always use a calibrated torque wrench and adhere to the recommended torque specifications for Aluminum 6061 fasteners. |
| Using incompatible lubricants or anti-seize compounds that can degrade the aluminum alloy. | Consult the material datasheet or engineering guidelines for approved lubrication and anti-seize solutions for Aluminum 6061. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine hardware and assemblies, Lightweight machinery and equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||