Engineered for extreme environments, this M23x137mm Hex Head Cap Screw from Titanium Grade 5 offers unparalleled strength-to-weight ratio and superior corrosion resistance. Ideal for critical structural applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M23 |
| Length | 137mm |
| Head Width | 13mm |
Purpose-built for heavy-duty applications, this M23x137mm Hex Head Cap Screw features a nominal diameter of M23 and a total length of 137mm. The head boasts a width of 13mm, facilitating secure engagement with standard tooling. Manufactured from Titanium Grade 5 (Ti-6Al-4V), it exhibits exceptional tensile strength (up to 950 MPa) and yield strength (up to 880 MPa), coupled with remarkable resistance to corrosion in harsh chemical and saline environments. Its low density (approx. 4.43 g/cm³) ensures significant weight reduction in assembled structures. These screws are critical for applications demanding high performance and longevity, including aerospace structural components, marine hardware, and high-performance automotive systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the mating threaded hole/nut to remove any debris or contaminants. Ensure proper thread lubrication if specified for the application. 2. Engage the screw into the receiving thread, hand-tightening initially to confirm proper alignment and prevent cross-threading. 3. Tighten the screw to the specified torque value using a calibrated torque wrench, ensuring even pressure application and avoiding over-tightening which can compromise material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the screw due to misalignment during initial engagement. | Always start threading by hand to ensure the screw is properly aligned with the receiving threads before applying any significant force or using tools. |
| Over-tightening the screw, leading to thread stripping or potential material fatigue. | Utilize a calibrated torque wrench and adhere to the manufacturer's recommended torque specifications for Titanium Grade 5 fasteners to prevent damage. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural assemblies, Marine and offshore equipment, High-performance automotive and racing components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||