This M23x120mm Nylon Hex Head Cap Screw offers superior corrosion resistance and dielectric properties. Its robust construction ensures reliable fastening in diverse environments, making it a preferred choice for demanding applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M23 |
| Length | 120mm |
| Head Width | 29mm |
Manufactured under strict quality controls, this M23x120mm Hex Head Cap Screw is precision-engineered from high-performance nylon. With a head width of 29mm, it provides excellent torque transmission. Nylon's inherent properties offer exceptional resistance to chemicals, moisture, and UV radiation, while also providing electrical insulation and vibration dampening. This makes it ideal for applications in corrosive environments, electrical assemblies, food processing, and marine settings where metal fasteners would degrade or pose safety risks.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-tighten the screw to engage the threads fully. 3. Use an appropriate wrench to tighten the screw to the desired torque, avoiding over-tightening to prevent thread stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread damage or material fatigue. | Use a torque wrench and adhere to recommended torque specifications for nylon fasteners to prevent damage. |
| Using a metal washer against the nylon head, which can cause excessive pressure and deformation. | Utilize nylon washers or flat washers designed for use with plastic components to distribute load evenly. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Corrosion-resistant assemblies, Electrical insulation applications, Food and beverage processing equipment, Marine and chemical plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||