Engineered for superior chemical resistance and non-conductive properties, this M23 x 81mm Nylon Hex Head Cap Screw offers reliable fastening in challenging industrial settings. Its robust design ensures long-term performance.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M23 |
| Length | 81mm |
| Head Width | 28mm |
Designed for demanding industrial environments, this M23 x 81mm Hex Head Cap Screw is manufactured from high-performance nylon, providing exceptional resistance to a wide range of chemicals, solvents, and moisture. The material's inherent dielectric strength makes it ideal for electrical applications where conductivity must be avoided. With a robust head width of 28mm, it ensures secure seating and efficient torque transfer. Its precise dimensions and material composition are engineered for optimal performance in applications requiring corrosion resistance and lightweight solutions, such as in chemical processing, water treatment, and electronics manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the threaded hole to remove debris and contaminants. 2. Thread the M23 x 81mm Nylon Hex Head Cap Screw into the designated fastener location by hand to avoid cross-threading. 3. Tighten the screw using an appropriate wrench, applying torque evenly until secure. Avoid overtightening to prevent material stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to thread stripping or head breakage. | Apply only the recommended torque for nylon fasteners. Use a torque wrench if available and consult material specifications for appropriate torque values. |
| Installing in environments exceeding the operational temperature range of nylon. | Verify the operating temperature limits of nylon and ensure the application environment remains within these parameters to maintain material integrity. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment assembly, Electrical enclosure and control panel fastening, Water and wastewater treatment systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||