This M23 x 76mm Hex Head Cap Screw, crafted from superior 316 stainless steel, offers exceptional corrosion resistance. It's engineered for demanding industrial applications requiring robust and reliable fastening.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Size | M23 |
| Length | 76mm |
| Head Width | 33mm |
A high-performance industrial component, this M23 x 76mm Hex Head Cap Screw is manufactured from premium 316 stainless steel, renowned for its enhanced resistance to pitting and crevice corrosion, particularly in chloride-rich environments. The M23 nominal diameter and 76mm length provide substantial load-bearing capacity, while the 33mm hex head width ensures a secure grip for torque application. Its inherent material properties make it ideal for applications in marine, chemical processing, food and beverage, and pharmaceutical industries where hygiene and environmental resistance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the mating tapped hole or nut to remove any debris or contaminants. 2. Apply an appropriate lubricant or anti-seize compound to the threads if specified for the application to prevent galling and ensure proper torque. 3. Insert the screw and engage the threads by hand for at least two full turns to prevent cross-threading. Tighten to the required torque specification using a calibrated torque wrench and a correctly sized socket for the 33mm hex head.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size socket for the 33mm hex head, leading to damaged fastener heads or slipping. | Always use a properly sized and high-quality socket to ensure a secure fit and prevent stripping of the hex head. |
| Over-tightening or under-tightening the screw, compromising joint integrity or leading to component failure. | Utilize a calibrated torque wrench and adhere to the manufacturer's recommended torque specifications for the M23 size and material. |
| Not cleaning threads before installation, causing galling or difficulty in achieving proper torque. | Thoroughly clean all threads of both the screw and the mating component to ensure smooth engagement and accurate torque application. |
A: This Hex Head Cap Screw, 316 Stainless Steel is manufactured from 316 Stainless Steel.
A: Marine and offshore equipment, Chemical processing plants, Food and beverage manufacturing equipment, Pharmaceutical machinery, Outdoor and corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||