This M23 x 28mm Hex Head Cap Screw, crafted from high-strength Polycarbonate, offers exceptional durability and corrosion resistance. Ideal for environments requiring non-conductive fasteners.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M23 |
| Length | 28mm |
| Head Width | 10mm |
Engineered for reliability and performance, this M23 x 28mm Hex Head Cap Screw features a robust Polycarbonate construction, providing excellent impact resistance and a wide operating temperature range. Its chemical inertness makes it suitable for corrosive environments where traditional metal fasteners would degrade. The M23 thread size ensures secure engagement with M23 tapped holes or nuts, while the 28mm length offers sufficient grip for various assembly requirements. The 10mm head width ensures compatibility with standard M10 hex drivers for efficient installation and torque application.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating M23 threaded component or nut is clean and free from debris. 2. Insert the M23 Hex Head Cap Screw into the designated hole, aligning threads carefully. 3. Using an appropriate M10 hex driver or wrench, tighten the screw to the required torque, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, which can lead to cracking or stripping. | Utilize a torque wrench and adhere to recommended torque values for polycarbonate fasteners to prevent damage. |
| Using the wrong size hex driver, potentially damaging the head of the screw. | Confirm the use of an M10 hex driver or wrench to match the screw's head width. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and panels, Medical equipment assembly, Corrosive chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||