Engineered for resilience, this M23 x 20mm Nylon Hex Head Cap Screw offers exceptional chemical resistance and non-conductive properties, ideal for corrosive and electrical environments. Its robust construction ensures reliable fastening.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M23 |
| Length | 20mm |
| Head Width | 31mm |
Designed for demanding industrial environments, this M23 x 20mm Hex Head Cap Screw is manufactured from high-performance Nylon. This material provides excellent dielectric strength, chemical inertness against a broad spectrum of solvents and acids, and a wide operating temperature range. The M23 thread size ensures high tensile strength for critical load-bearing applications. The 20mm length offers precise assembly for medium-duty connections, while the 31mm head width provides ample surface area for secure tightening with standard hex tools. Its lightweight nature also contributes to ease of handling and installation in complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Manually thread the M23 Nylon Hex Head Cap Screw into the receiving component until finger tight. 3. Using a suitable hex driver, tighten the screw to the recommended torque specification for Nylon fasteners, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening Nylon screws | Always adhere to torque specifications for Nylon fasteners; overtightening can strip threads or damage the screw head. |
| Using in applications with high impact or shear loads | While strong, Nylon is not suitable for extreme impact or shear forces. Evaluate load requirements and consider metallic alternatives if necessary. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Chemical processing equipment, Corrosion-prone marine environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||