This M23 x 14mm Nylon Hex Head Cap Screw provides robust fastening with superior chemical resistance and dielectric properties. Ideal for corrosive environments and electrical isolation needs.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M23 |
| Length | 14mm |
| Head Width | 22mm |
A high-performance industrial component, this M23 x 14mm Nylon Hex Head Cap Screw is engineered from durable, high-tensile strength nylon. Featuring a nominal diameter of M23, a precise length of 14mm, and a head width of 22mm, it offers excellent resistance to a wide range of chemicals, solvents, and moisture, preventing galvanic corrosion common with metallic fasteners. Its inherent dielectric strength makes it suitable for applications where electrical conductivity must be avoided, ensuring safety and preventing short circuits in electronic assemblies. The hex head design allows for secure torque application with standard tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the M23 Nylon Hex Head Cap Screw into the receiving component until snug. 3. Using an appropriate hex driver, tighten the screw to the recommended torque specification for nylon fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nylon fasteners | Refer to nylon fastener torque charts or consult engineering specifications to avoid stripping threads or deforming the component. |
| Using in applications exceeding temperature limits | Verify the operating temperature range of the nylon material against the environmental conditions of the application to prevent degradation. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment mounting, Chemical processing equipment assembly, Corrosive environment structural fastening.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||