This M23 x 11mm Polycarbonate Hex Head Cap Screw offers exceptional impact resistance and chemical inertness. Its robust construction ensures reliable performance in challenging industrial applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Size | M23 |
| Length | 11mm |
| Head Width | 32mm |
Manufactured under strict quality controls, this M23 x 11mm Hex Head Cap Screw features a 32mm head width for optimal torque application. Constructed from high-grade polycarbonate, it provides excellent dielectric strength, corrosion resistance, and a high tensile strength-to-weight ratio. This material also offers superior UV stability and a wide operating temperature range, making it ideal for environments where metal fasteners would degrade or pose a safety hazard.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Insert the M23 Hex Head Cap Screw into the designated fastening hole. 3. Tighten the screw using a suitable wrench to the recommended torque specification for polycarbonate, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M23 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M23 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, leading to thread stripping or head fracture. | Utilize a torque wrench set to the manufacturer's recommended value for polycarbonate fasteners. Consult material compatibility charts for precise torque limits. |
| Using metallic tools that can scratch or damage the polycarbonate surface. | Employ tools with protective coatings or use specialized plastic-compatible drivers to prevent surface marring and maintain the screw's integrity. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and insulation, Medical equipment assembly, Corrosive chemical processing environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||