Engineered for robust performance, this M22x76mm Hex Head Cap Screw, crafted from premium Aluminum 6061, offers superior strength and corrosion resistance for critical assemblies.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Size | M22 |
| Length | 76mm |
| Head Width | 14mm |
Trusted by engineers across multiple sectors, this M22x76mm Hex Head Cap Screw is manufactured from high-strength Aluminum 6061, renowned for its excellent corrosion resistance and machinability. The M22 nominal diameter and 76mm length provide substantial load-bearing capacity, while the 14mm hex head offers a broad bearing surface for secure tightening with standard tooling. This alloy exhibits a good strength-to-weight ratio, making it ideal for applications where weight reduction is a consideration without compromising structural integrity. Its excellent resistance to atmospheric and seawater corrosion ensures longevity in diverse environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Thread the M22x76mm Hex Head Cap Screw into the designated receptacle by hand to confirm alignment. 3. Tighten using a calibrated torque wrench to the specified torque value for Aluminum 6061, typically between 70-90 Nm, to avoid over-stressing the material or threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the fastener, leading to thread stripping or material deformation. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Aluminum 6061. |
| Using the wrong size wrench, resulting in damage to the hex head. | Utilize a 14mm hex wrench or socket that fits snugly to ensure proper engagement and prevent damage. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine hardware and fittings, Automotive chassis and suspension systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||