This M22x67mm hex head cap screw, crafted from high-strength Titanium Grade 5, offers exceptional corrosion resistance and a superior strength-to-weight ratio for critical structural applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M22 |
| Length | 67mm |
| Head Width | 29mm |
A high-performance industrial component, this Hex Head Cap Screw is precisely manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent tensile strength (950 MPa minimum) and fatigue resistance. With an M22 thread size, a nominal length of 67mm, and a substantial 29mm head width for robust torque application, it is engineered for extreme environments. Its biocompatibility and inertness make it suitable for demanding applications where reliability and longevity are paramount, surpassing the performance of conventional steel fasteners in corrosive or high-stress conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubricant or anti-seize compound to the threads if recommended for the specific application. 3. Thread the cap screw by hand until snug. 4. Tighten to the specified torque using a calibrated torque wrench, applying even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the fastener, which can strip threads or compromise material integrity. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Titanium Grade 5 fasteners. |
| Using incompatible tools that can damage the hex head, leading to difficulty in removal or installation. | Utilize high-quality, properly sized hex sockets or wrenches designed for metric fasteners. |
| Cross-threading the fastener during installation, damaging both the screw and the mating component. | Start threading by hand to ensure proper engagement of the threads before applying any torque. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and equipment, High-performance automotive assemblies, Marine and offshore hardware, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||