Engineered for superior corrosion resistance, this M22x62mm brass hex head cap screw offers reliable fastening in challenging industrial settings. Its non-magnetic and non-sparking properties ensure safety in sensitive applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M22 |
| Length | 62mm |
| Head Width | 15mm |
Designed for demanding industrial environments, this M22x62mm brass hex head cap screw features a nominal diameter of M22 and a thread length of 62mm. The head exhibits a width of 15mm, providing ample engagement for standard tooling. Crafted from high-grade brass, this fastener offers exceptional resistance to corrosion, tarnishing, and certain chemical attacks, making it ideal for marine, chemical processing, and food/beverage industries. Its inherent non-magnetic and non-sparking characteristics are critical for applications where electrical conductivity or ignition hazards are a concern. The tensile strength of brass ensures secure and durable connections in moderate load-bearing scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure threads on both the screw and the mating component are clean and free of debris. 2. Hand-thread the screw into the component to prevent cross-threading. 3. Using a calibrated torque wrench, tighten the screw to the specified torque value, ensuring even pressure is applied to the hex head.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening brass fasteners, which can lead to thread stripping or galling. | Always consult torque specifications for brass fasteners and use a calibrated torque wrench. Avoid excessive force. |
| Using brass screws in high-stress, load-bearing applications where steel would be more appropriate. | Assess the load requirements of the application. While brass offers good corrosion resistance, its mechanical strength is lower than steel for heavy-duty structural connections. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Chemical processing equipment, Food and beverage machinery, Electrical enclosures in corrosive atmospheres, Non-sparking tool applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||