High-performance M22x61mm Hex Head Cap Screws manufactured from Titanium Grade 5. Offering exceptional strength-to-weight ratio and superior corrosion resistance for critical structural and mechanical assemblies.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M22 |
| Length | 61mm |
| Head Width | 24mm |
Engineered for reliability and performance, these M22x61mm Hex Head Cap Screws are forged from premium Titanium Grade 5 (Ti-6Al-4V). This aerospace-grade alloy provides a minimum tensile strength of 895 MPa and yield strength of 827 MPa, while exhibiting outstanding resistance to corrosion in aggressive environments. The precise M22 nominal diameter, 61mm length, and 24mm head width ensure secure fastening and uniform load distribution. Ideal for applications requiring high strength, low weight, and exceptional durability, such as in marine, aerospace, medical implants, and high-performance automotive components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a suitable anti-seize compound to the threads if required by the application environment. 3. Torque the screw to the manufacturer's specified value for the joint assembly, using a calibrated torque wrench. 4. Verify proper seating of the hex head against the clamped surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the screw, leading to thread stripping or material fatigue. | Always use a calibrated torque wrench and adhere to the recommended torque specifications for the specific joint design and materials. |
| Using incompatible tools or overtightening with excessive force, potentially damaging the hex head. | Utilize appropriate-sized sockets or wrenches designed for hex heads to ensure even pressure distribution and prevent cam-out. |
| Failing to use an anti-seize compound in corrosive environments, leading to galling or seizing. | Consult application requirements and consider using a high-quality anti-seize lubricant specifically designed for titanium fasteners in challenging conditions. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance automotive assemblies, Medical implants and devices, Marine and offshore equipment, Corrosion-resistant industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||