Engineered for demanding environments, this M22x61mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Its robust nylon construction ensures reliability in challenging industrial and chemical applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M22 |
| Length | 61mm |
| Head Width | 16mm |
Built to exacting engineering tolerances, this M22x61mm Hex Head Cap Screw is manufactured from high-performance nylon, providing superior chemical resistance, a non-conductive nature, and significant tensile strength for its weight. The head features a 16mm width, ensuring adequate torque application with standard tooling. This material is ideal for environments where galvanic corrosion is a concern or where electrical insulation is critical. Its smooth surface finish minimizes friction and facilitates secure fastening in a wide range of assemblies. The 61mm length offers substantial thread engagement for robust connections.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate metric wrench or socket (16mm AF) for the hex head. 2. Align the cap screw with the pre-tapped hole or nut, ensuring threads are engaged. 3. Tighten the screw gradually to the required torque, avoiding over-tightening to prevent stripping or material damage. 4. Verify secure fastening and proper alignment of the assembled components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or incorrect tooling, leading to thread stripping or head damage. | Employ the correct size (16mm AF) wrench or socket and apply torque judiciously, respecting the material's limitations. |
| Installing in an environment exceeding the nylon's temperature or chemical resistance limits. | Confirm the operating temperature and chemical exposure do not exceed the nylon material's specifications before installation. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Electrical enclosures and insulation, Marine and coastal hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||