Engineered for superior performance, this M22x42mm Hex Head Cap Screw is crafted from aerospace-grade Titanium Grade 5. It offers exceptional strength-to-weight ratio and unparalleled corrosion resistance.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M22 |
| Length | 42mm |
| Head Width | 29mm |
Built to exacting engineering tolerances, this M22x42mm Hex Head Cap Screw features a substantial 29mm head width for robust torque application. Fabricated from Titanium Grade 5 (Ti-6Al-4V), it delivers a minimum tensile strength of 950 MPa and excellent fatigue resistance, making it ideal for high-stress environments where weight reduction and extreme corrosion prevention are critical. The precise threading ensures secure engagement and minimal vibration loosening. This fastener is designed to withstand harsh chemical exposure and elevated temperatures, maintaining structural integrity across a wide operational spectrum.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean fastener threads and mating surfaces. 2. Apply appropriate lubricant if specified for the application. 3. Tighten screw to the recommended torque specification using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or material fatigue. | Always use a calibrated torque wrench and adhere to the manufacturer's specified torque values for the material and application. |
| Using standard steel tools which can damage the titanium surface. | Utilize tools made from softer materials or specifically designed for titanium fasteners to prevent galling and surface damage. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance automotive assemblies, Marine and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||