Engineered for non-corrosive environments, this M22 x 30mm Nylon Hex Head Cap Screw offers excellent dielectric strength and chemical resistance. Its lightweight design and reliable performance make it a superior choice for specialized fastening needs.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M22 |
| Length | 30mm |
| Head Width | 15mm |
Precision-manufactured to tight tolerances, this M22 x 30mm Nylon Hex Head Cap Screw features a 15mm head width for secure engagement. Constructed from high-performance nylon, it exhibits superior resistance to a wide range of chemicals, solvents, and environmental factors, preventing galvanic corrosion and reducing weight. Its non-conductive properties are critical for electrical insulation applications, while its inherent flexibility allows for slight expansion and contraction without compromising joint integrity. This screw is ideal for applications where metal fasteners are unsuitable due to corrosion, electrical conductivity, or weight considerations, such as in marine environments, chemical processing equipment, and electronics assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the M22x30mm Nylon Hex Head Cap Screw into the receiving hole to avoid cross-threading. 3. Tighten using an appropriate wrench or socket to the recommended torque, avoiding over-tightening to prevent stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or head fracture. | Use a torque wrench and adhere to the material's recommended torque specifications, typically lower than for metal fasteners. |
| Using in high-temperature or high-stress applications where nylon's properties are insufficient. | Verify the operating temperature and mechanical load requirements against the nylon material's datasheet before selection. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation and component mounting, Marine and offshore equipment assembly, Chemical processing and laboratory apparatus.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||