Engineered for optimal performance, this M22x30mm hex head cap screw is manufactured from robust Aluminum 6061. It provides a reliable and lightweight fastening solution for diverse industrial and commercial applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M22 |
| Length | 30mm |
| Head Width | 33mm |
Specified by design engineers worldwide, this M22x30mm hex head cap screw is precisely machined from high-grade Aluminum 6061, offering an excellent balance of strength, corrosion resistance, and lightweight properties. The M22 nominal diameter ensures substantial load-bearing capacity, while the 30mm length provides ample engagement. The expansive 33mm hex head width facilitates secure tightening with standard tooling, making it ideal for applications where weight reduction and resistance to environmental degradation are critical, such as in aerospace, automotive, and marine sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Insert the cap screw into the intended fastener hole. 3. Tighten the cap screw to the specified torque using a calibrated wrench, ensuring uniform pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening aluminum fasteners, leading to thread stripping or material deformation. | Always adhere to the manufacturer's recommended torque specifications for Aluminum 6061 fasteners to prevent damage. |
| Using the wrong size wrench, which can damage the hex head and hinder proper tightening. | Utilize a wrench that precisely fits the 33mm head width to ensure secure engagement and prevent tool slippage. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive chassis and body assembly, Marine hardware and equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||