Engineered from high-strength Titanium Grade 5, this M22x17mm hex head cap screw offers superior corrosion resistance and a lightweight profile. Ideal for demanding environments where performance is paramount.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M22 |
| Length | 17mm |
| Head Width | 36mm |
Built to exacting engineering tolerances, this M22x17mm hex head cap screw is fabricated from Titanium Grade 5 (Ti-6Al-4V), renowned for its exceptional strength-to-weight ratio, excellent fatigue strength, and outstanding corrosion resistance in aggressive media. The M22 nominal thread size, combined with a 17mm length and a substantial 36mm hex head width, ensures robust engagement and secure fastening. This material is critical for applications requiring non-magnetic properties and biocompatibility, such as in aerospace structures, marine hardware, and medical implants.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the receiving threaded hole/nut to remove any debris or contaminants. 2. Apply a suitable anti-seize compound or lubricant to the threads if recommended for the specific application to prevent galling and ensure proper torque. 3. Engage the screw by hand initially to verify thread alignment, then tighten using an appropriate wrench or socket to the specified torque value, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Galling of titanium threads during installation due to insufficient lubrication or rapid tightening. | Always use a high-quality anti-seize compound specifically designed for titanium, and tighten fasteners smoothly and progressively to the recommended torque. |
| Using standard steel tools which can scratch or damage the titanium surface, compromising its aesthetic and potentially its corrosion resistance. | Employ tools made from softer materials like brass or aluminum, or ensure tools have a protective coating when working with titanium fasteners. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance marine hardware, Medical implant and device manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||