Engineered for demanding environments, this M22x100mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Its lightweight construction makes it ideal for various assembly and fastening needs.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M22 |
| Length | 100mm |
| Head Width | 9mm |
A proven choice for industrial professionals, this M22x100mm Nylon Hex Head Cap Screw is constructed from high-performance Nylon, offering superior resistance to chemicals, moisture, and UV radiation. Its M22 metric thread pitch and 100mm length provide robust fastening capabilities, while the 9mm head width ensures compatibility with standard tooling. The inherent dielectric strength of Nylon makes this fastener ideal for applications within electrical enclosures, control panels, and areas where electrical conductivity is a concern. Its non-magnetic properties further extend its utility in sensitive electronic assemblies. The material's inherent flexibility also contributes to vibration dampening.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the M22x100mm Nylon Hex Head Cap Screw into the receiving hole until snug. 3. Tighten using a compatible wrench or socket to the recommended torque specification for Nylon fasteners, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the Nylon screw, leading to thread stripping or material deformation. | Utilize a torque wrench set to the appropriate value for Nylon fasteners to prevent overstressing the material and ensure a secure, yet undamaged, connection. |
| Using the screw in an application exceeding its temperature or load-bearing limits. | Verify that the operating temperature and anticipated mechanical loads are within the specified limits for Nylon fasteners to maintain structural integrity and performance. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment assembly, Electrical enclosures and control panels, Marine and coastal environment fastening.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||