This M22 x 75mm hex head cap screw, forged from robust carbon steel, offers superior tensile strength and durability for critical structural and mechanical assemblies. Its precise dimensions ensure reliable performance.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Size | M22 |
| Length | 75mm |
| Head Width | 18mm |
Built to exacting engineering tolerances, this M22 x 75mm hex head cap screw features a nominal diameter of 22mm and a length of 75mm, with a precisely machined head width of 18mm. Constructed from high-grade carbon steel, it exhibits excellent tensile and shear strength, rated for significant load-bearing capacities. The hardened surface resists wear and abrasion, making it ideal for applications subjected to vibration, shock, and substantial mechanical stress, such as in heavy machinery, automotive chassis, and industrial equipment manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with a tapped hole or nut of M22 thread. 2. Apply a suitable lubricant or threadlocker if required by the application's environmental conditions or torque specifications. 3. Tighten the hex head cap screw to the specified torque using a calibrated torque wrench and a socket of appropriate size (18mm).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an undersized or oversized tool for tightening, leading to stripped heads or improper torque application. | Always use a precisely sized 18mm socket or wrench to ensure proper engagement with the hex head and accurate torque application. |
| Over-torquing or under-torquing the fastener, compromising joint integrity or leading to premature failure. | Consult engineering drawings or torque charts for the correct tightening specification and utilize a calibrated torque wrench for verification. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Heavy Machinery Assembly, Automotive Chassis Construction, Industrial Equipment Manufacturing, Structural Steel Connections.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||