This M22 x 70mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Its lightweight construction and chemical inertness make it a superior fastener for demanding industrial applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M22 |
| Length | 70mm |
| Head Width | 33mm |
A proven choice for industrial professionals, this M22 x 70mm Nylon Hex Head Cap Screw is engineered for reliable performance in corrosive and electrically sensitive environments. With a nominal diameter of M22, an overall length of 70mm, and a head width of 33mm, it provides robust fastening capabilities. Constructed from high-performance nylon, it exhibits excellent tensile strength, resistance to a broad spectrum of chemicals, and superior electrical insulation properties. Ideal for applications where metal fasteners would corrode or conduct electricity, such as in chemical processing plants, outdoor electrical enclosures, and marine equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw into the receiving component until snug. 3. Use a wrench to tighten the screw to the recommended torque specification, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, which can strip threads or deform the head. | Use a torque wrench and adhere to recommended torque values for nylon fasteners. |
| Using in applications exceeding the material's temperature or load-bearing limits. | Verify the operating environment and load requirements against nylon's material specifications. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation and grounding systems, Chemical processing equipment, Marine and offshore installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||