Engineered from high-performance Titanium Grade 5, this M22 x 69mm hex head cap screw delivers exceptional strength and corrosion resistance for critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M22 |
| Length | 69mm |
| Head Width | 25mm |
Designed for demanding industrial environments, this M22 x 69mm hex head cap screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), offering a superior strength-to-weight ratio and excellent resistance to corrosion in aggressive media. Its M22 thread size, 69mm length, and 25mm head width ensure robust structural integrity and reliable fastening in applications requiring high tensile strength and fatigue resistance. Ideal for environments exposed to extreme temperatures, saltwater, or corrosive chemicals, this fastener is a cornerstone in aerospace, medical implant technology, and marine engineering.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Apply a suitable lubricant or anti-seize compound to the threads if necessary, especially in corrosive environments. 3. Engage the screw by hand to prevent cross-threading. 4. Tighten the screw to the specified torque using an appropriate calibrated torque wrench and socket. 5. Verify the correct seating of the head against the clamped material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or material deformation. | Always use a calibrated torque wrench and adhere to manufacturer-specified torque values for the application. |
| Using incorrect tools or damaged sockets, which can round the hex head and impede proper tightening. | Utilize high-quality, properly sized sockets that fit snugly to ensure even force distribution. |
| Failure to clean mating threads, potentially causing galling or reduced clamping force. | Thoroughly inspect and clean both the screw threads and the receiving threads before installation. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implant fixation systems, Marine and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||