This M22 x 53mm Hex Head Cap Screw, crafted from high-strength Aluminum 6061, offers superior corrosion resistance and a lightweight solution for secure fastening.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M22 |
| Length | 53mm |
| Head Width | 19mm |
Engineered for reliability and performance, this M22 x 53mm Hex Head Cap Screw features a robust 19mm head width for optimal torque application. Manufactured from Aluminum 6061, it provides an excellent strength-to-weight ratio, exhibiting good machinability and formability, making it ideal for environments where corrosion is a concern. The material's inherent properties ensure consistent performance across a wide temperature range, while its non-magnetic nature is advantageous in sensitive electronic assemblies. This fastener is designed to meet stringent industrial standards for structural integrity and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Thread the cap screw into the pre-tapped hole or mating nut by hand to avoid cross-threading. 3. Tighten using an appropriate wrench or socket to the recommended torque specification for Aluminum 6061, taking care not to overtighten.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to thread stripping or material deformation. | Always consult and adhere to the torque specifications for Aluminum 6061 fasteners to prevent damage. |
| Not verifying thread compatibility between the screw and the receiving component. | Confirm that both the screw and the mating part have the same thread size (M22) and pitch. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace and Aviation components, Automotive structural assemblies, Marine hardware and fixtures, High-performance sporting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||