Engineered for robust fastening, this M22 x 35mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Its lightweight yet strong construction makes it ideal for a wide range of industrial and electrical applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M22 |
| Length | 35mm |
| Head Width | 19mm |
Precision-manufactured to tight tolerances, this M22 x 35mm Hex Head Cap Screw is constructed from high-performance nylon. The material exhibits excellent chemical resistance, a broad operating temperature range, and superior electrical insulation properties. The M22 thread standard ensures secure engagement with M22 tapped holes or nuts, while the 35mm length provides ample grip. The 19mm head width is specifically designed for standard M22 hex tooling, facilitating efficient installation and removal. This fastener is an optimal choice for environments where corrosion, conductivity, or weight are critical concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads (hole or nut) are clean and free of debris. 2. Hand-thread the M22 x 35mm Nylon Hex Head Cap Screw into the assembly to verify alignment and prevent cross-threading. 3. Using a standard M22 hex wrench or socket, tighten the screw to the required torque specification, taking care not to overtighten and strip the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the nylon screw, leading to thread stripping or material deformation. | Adhere to the recommended torque specifications for nylon fasteners. Consider using a torque wrench calibrated for plastic materials. |
| Using excessive force during installation, potentially damaging the screw or the mating component. | Apply steady, controlled pressure during tightening. If resistance is encountered, stop and inspect for alignment issues or debris. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and panel mounting, Corrosive chemical processing equipment, Lightweight structural assemblies in automation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||