This M22 x 26mm hex head cap screw, forged from robust carbon steel, offers superior tensile strength and torque resistance for critical fastening applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Size | M22 |
| Length | 26mm |
| Head Width | 20mm |
Manufactured under strict quality controls, this M22 x 26mm hex head cap screw is engineered from high-grade carbon steel, ensuring exceptional durability and load-bearing capacity. Featuring a nominal diameter of M22 and a precise 26mm length, its 20mm head width is optimized for standard wrench engagement, facilitating secure tightening. The inherent properties of carbon steel provide excellent resistance to shear and tensile stress, making it ideal for heavy-duty machinery, structural assemblies, and demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Insert the cap screw into the assembled components. 3. Tighten the cap screw to the recommended torque specification using an appropriate wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect torque, leading to under-tightening or fastener failure. | Always refer to fastener torque charts or engineering specifications for the correct torque value for the specific application and material combination. |
| Cross-threading the fastener, damaging both the screw and the mating component. | Initiate thread engagement by hand to ensure proper alignment before applying any tool torque. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Heavy Machinery Assembly, Structural Steel Erection, Automotive Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||