Engineered from high-performance Nylon, this M22 x 19mm Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Ideal for applications requiring a lightweight, non-metallic fastening solution.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M22 |
| Length | 19mm |
| Head Width | 13mm |
Built to exacting engineering tolerances, this M22 x 19mm Hex Head Cap Screw is manufactured from robust Nylon, providing superior resistance to chemicals, moisture, and electrical conductivity. With a nominal thread diameter of M22 and a length of 19mm, it features a precisely machined hex head with a width of 13mm, ensuring consistent torque application with standard tooling. The inherent strength and low friction coefficient of Nylon make it suitable for environments where metal fasteners would degrade or interfere with electrical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Hand-thread the Nylon Hex Head Cap Screw to prevent cross-threading. 3. Use a calibrated torque wrench to tighten to the specified torque value, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, leading to thread stripping or head deformation. | Utilize a calibrated torque wrench and adhere to recommended torque specifications for Nylon fasteners. |
| Using excessive force during installation, potentially damaging the Nylon material. | Apply steady, controlled pressure during tightening, and re-check torque after a short period of service. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Chemical processing equipment, Marine and outdoor applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||