Engineered from high-performance polycarbonate, this M22 x 15mm hex head cap screw offers exceptional impact resistance and electrical insulation. Its chemical inertness makes it suitable for various environmental conditions.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M22 |
| Length | 15mm |
| Head Width | 34mm |
Precision-manufactured to tight tolerances, this M22 x 15mm hex head cap screw is constructed from robust polycarbonate, offering a superior strength-to-weight ratio and excellent dielectric properties. The material's inherent UV resistance and non-corrosive nature ensure longevity in challenging applications. The 34mm head width provides ample surface area for torque application, while the M22 thread ensures secure fastening. Ideal for applications where metallic fasteners are unsuitable due to conductivity, corrosion, or weight concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Insert the M22 polycarbonate hex head cap screw into the designated hole. 3. Tighten using an appropriate wrench, applying steady torque until secure. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, which can lead to thread stripping or head deformation. | Use a torque wrench set to the manufacturer's recommended torque specification for polycarbonate fasteners. Apply steady, consistent pressure. |
| Using metallic tools that can scratch or damage the polycarbonate head. | Employ tools made of non-marring materials like nylon or brass, or ensure the tool heads are smooth and free of burrs. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and control panels, Marine and outdoor equipment, Medical device assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||