Engineered for superior performance, this M22 x 143mm Grade 5 Titanium hex head cap screw offers exceptional strength-to-weight ratio and corrosion resistance, ideal for critical assemblies.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M22 |
| Length | 143mm |
| Head Width | 12mm |
Precision-manufactured to tight tolerances, this M22 x 143mm Grade 5 Titanium hex head cap screw features a 12mm head width. Grade 5 (Ti-6Al-4V) titanium alloy provides a minimum tensile strength of 895 MPa and excellent corrosion resistance in harsh environments. Its lightweight nature, approximately 40% lighter than steel, makes it suitable for aerospace, marine, and high-performance automotive applications where weight reduction is paramount without compromising structural integrity. The hex head design ensures efficient torque application with standard tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a suitable thread lubricant or anti-seize compound if recommended for the application. 3. Engage the screw by hand to prevent cross-threading, then tighten using an appropriate torque wrench to the specified value for Grade 5 titanium fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, which can lead to thread stripping or fastener failure, especially in titanium. | Always use a calibrated torque wrench and adhere to manufacturer-specified torque values for Grade 5 titanium. |
| Using standard steel tools which can cause galling or damage to the titanium threads. | Utilize high-quality tooling, preferably with a coating or designed for titanium, and ensure proper engagement. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fittings, High-performance automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||