This M22 x 140mm Nylon Hex Head Cap Screw offers exceptional chemical resistance and non-conductive properties. Its robust design ensures reliable fastening in corrosive environments and applications requiring electrical insulation.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M22 |
| Length | 140mm |
| Head Width | 28mm |
Engineered for reliability and performance, this M22 x 140mm Hex Head Cap Screw is constructed from high-grade Nylon, offering superior tensile strength and excellent resistance to a wide range of chemicals and solvents. The M22 thread size ensures compatibility with standard M22 nuts and tapped holes, while the 140mm length provides ample engagement for secure connections. The 28mm head width facilitates easy torque application with standard wrenches, making it ideal for applications demanding robust yet lightweight fastening solutions in corrosive or electrically sensitive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Hand-thread the M22 Nylon Hex Head Cap Screw into the receiving material or nut until snug. 3. Using an appropriate wrench with a 28mm hex head, tighten the screw to the required torque specification, taking care not to overtighten due to the material's properties.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, which can lead to stripping or fracture. | Always adhere to specified torque values and use a torque wrench if precise control is needed. Recognize that nylon has a lower yield strength than metal fasteners. |
| Using the nylon screw in applications with extreme temperature fluctuations exceeding its operational range. | Verify the operating temperature range of the nylon material against the environmental conditions of the application. Consider alternative materials for extreme heat or cold. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment assembly, Electrical insulation applications, Marine and water treatment systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||