This M22 x 136mm Hex Head Cap Screw, manufactured from high-grade carbon steel, offers superior tensile strength and durability for critical load-bearing applications.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Size | M22 |
| Length | 136mm |
| Head Width | 32mm |
Specified by design engineers worldwide, this M22 x 136mm hex head cap screw is engineered for robust performance in demanding environments. Constructed from premium carbon steel, it exhibits excellent tensile strength and shear resistance, ensuring reliable fastening under significant mechanical stress. The M22 nominal diameter, combined with a 136mm length and a 32mm head width, provides optimal torque transfer and secure joint integrity. This fastener meets stringent industrial standards, making it suitable for heavy machinery, structural components, and automotive assemblies where dependability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the bolt threads and the mating tapped hole or nut to remove any debris or lubricant that could affect torque. 2. Apply the appropriate lubricant or anti-seize compound to the threads if specified by the application or design. 3. Thread the cap screw into the mating component by hand for at least two full turns to ensure proper engagement and prevent cross-threading. 4. Using a calibrated torque wrench set to the design specification, tighten the cap screw to the required torque value. Ensure the wrench is applied squarely to the head.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the screw during initial insertion. | Always start threading the screw by hand for several turns to confirm proper thread alignment before using any tools. |
| Over-tightening or under-tightening the fastener, leading to joint failure or loosening. | Utilize a calibrated torque wrench and adhere strictly to the torque specifications outlined in the design documentation. |
| Using a screw of incorrect length or diameter for the application. | Verify the required M22 x 136mm dimensions against the design drawings and material specifications before installation. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Heavy machinery assembly, Structural steel connections, Automotive powertrain components, Industrial equipment mounting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||