This M22 x 133mm brass hex head cap screw offers superior corrosion resistance and non-magnetic properties. Engineered for demanding environments, it provides reliable and durable fastening in a wide array of applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M22 |
| Length | 133mm |
| Head Width | 8mm |
Precision-manufactured to tight tolerances, this M22 x 133mm hex head cap screw is constructed from high-grade brass, offering excellent corrosion resistance against various chemicals and atmospheric conditions. Its inherent non-magnetic nature makes it suitable for sensitive electrical and electronic assemblies. The M22 thread size ensures robust load-bearing capacity, while the 133mm length provides ample reach for thicker materials or stacked components. The precisely machined 8mm head width ensures secure engagement with standard hex drivers, facilitating efficient installation and disassembly. This screw is engineered for longevity in environments prone to moisture or corrosive agents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating threads to remove any debris or contaminants. 2. Apply appropriate lubrication if required for ease of assembly and to prevent galling. 3. Thread the cap screw into the receiving component, ensuring smooth engagement. Tighten to the specified torque using a calibrated hex wrench or socket.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to thread stripping or fastener fatigue. | Always adhere to the recommended torque specifications for the specific application and materials being joined. Use a torque wrench for accurate control. |
| Cross-threading the cap screw by not starting it straight into the receiving threads. | Gently start the screw by hand for several turns to ensure proper alignment before using a tool. If resistance is felt, back it out and realign. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and enclosures, Architectural elements and decorative fixtures, Food processing equipment where non-corrosive materials are critical.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||