Engineered from aerospace-grade Titanium Grade 5, this M22 x 123mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for critical assemblies.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M22 |
| Length | 123mm |
| Head Width | 13mm |
Trusted by engineers across multiple sectors, this M22 x 123mm hex head cap screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent combination of high tensile strength (up to 950 MPa), low density, and remarkable resistance to corrosion in aggressive environments. The M22 nominal diameter, 123mm length, and 13mm head width conform to stringent industrial standards, ensuring reliable performance in aerospace, medical implants, chemical processing, and high-performance automotive applications where material integrity and weight reduction are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a small amount of anti-seize compound to threads if required by the application environment. 3. Tighten the screw to the specified torque using a calibrated torque wrench, ensuring proper engagement with the mating fastener.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, potentially leading to thread stripping or material fatigue. | Always use a calibrated torque wrench and adhere to manufacturer-specified torque values for the material and application. |
| Using incompatible tools that can damage the hex head during installation or removal. | Employ the correct size and type of hex socket or wrench for the M22 head to ensure proper engagement and prevent damage. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical device manufacturing, Chemical processing equipment, High-performance marine hardware, Automotive performance parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||