Engineered for superior performance in corrosive and high-stress applications, this M22 x 119mm Hex Head Cap Screw is manufactured from robust Titanium Grade 5. Its exceptional strength-to-weight ratio and corrosion resistance make it the ideal fastening solution.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M22 |
| Length | 119mm |
| Head Width | 22mm |
Designed for demanding industrial environments, this M22 x 119mm Hex Head Cap Screw is precisely machined from Titanium Grade 5 (Ti-6Al-4V), offering an unparalleled combination of high tensile strength (up to 950 MPa), excellent fatigue resistance, and superior corrosion immunity. The M22 nominal diameter with a 119mm length and a 22mm head width ensures robust engagement and secure fastening in critical assemblies. Its biocompatibility and non-magnetic properties further expand its utility across aerospace, marine, medical, chemical processing, and oil & gas industries where extreme conditions and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a suitable anti-seize compound if recommended for the specific application. 3. Tighten the hex head cap screw to the manufacturer's specified torque value using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the fastener, leading to thread stripping or material fatigue. | Always use a calibrated torque wrench and adhere to specified torque values for the material and application. |
| Using incompatible lubricants or anti-seize compounds that can cause galvanic corrosion or hydrogen embrittlement. | Consult material compatibility charts and use only recommended lubricants and anti-seize compounds for Titanium Grade 5. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine and offshore equipment, Chemical processing plant infrastructure, High-performance automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||