Engineered for superior performance in corrosive environments, this M22 x 114mm hex head cap screw is manufactured from premium 316 stainless steel. Its robust design ensures secure and lasting fastening in critical applications.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Size | M22 |
| Length | 114mm |
| Head Width | 28mm |
Trusted by engineers across multiple sectors, this M22 x 114mm hex head cap screw offers exceptional mechanical strength and superior corrosion resistance due to its 316 stainless steel composition. Featuring a nominal diameter of M22, a length of 114mm, and a head width of 28mm, it meets stringent industrial standards for reliability. The inherent passivation layer of 316 stainless steel provides excellent protection against pitting and crevice corrosion in marine, chemical processing, and food-grade environments, making it the preferred choice for demanding assembly and structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the threaded hole and the screw threads to remove any debris or contaminants. 2. Apply a suitable lubricant or anti-seize compound if required by the application or material compatibility. 3. Insert the screw into the pre-drilled hole and hand-tighten to ensure proper thread engagement. 4. Using a calibrated torque wrench, tighten the screw to the manufacturer's specified torque value, following a star or alternating pattern for multiple fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or material deformation. | Always use a calibrated torque wrench and adhere to the specified torque values for the fastener and mating material. |
| Using incompatible lubricants or anti-seize compounds that can compromise the corrosion resistance of 316 stainless steel. | Consult material compatibility charts and use lubricants specifically recommended for stainless steel applications, especially in corrosive environments. |
A: This Hex Head Cap Screw, 316 Stainless Steel is manufactured from 316 Stainless Steel.
A: Marine hardware and offshore equipment, Chemical processing plant components, Food and beverage processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||