Engineered for superior performance, this M22 x 101mm hex cap screw is crafted from aerospace-grade Titanium Grade 5. Offering exceptional strength-to-weight ratio and corrosion resistance, it's ideal for critical structural and mechanical assemblies.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M22 |
| Length | 101mm |
| Head Width | 33mm |
Built to exacting engineering tolerances, this M22 x 101mm hex head cap screw features a nominal diameter of M22 and a length of 101mm. The head is machined to a width of 33mm, ensuring compatibility with standard tooling. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits a minimum tensile strength of 895 MPa and a yield strength of 827 MPa, with excellent corrosion resistance in aggressive environments. Its low density (4.43 g/cm³) makes it a preferred choice for weight-sensitive applications where structural integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Hand-thread the screw to verify alignment and prevent cross-threading. 3. Apply torque using an appropriately sized socket wrench, adhering to specified torque values for Grade 5 titanium to avoid over-tightening or under-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque, which can lead to thread stripping or material deformation. | Always consult torque charts specific to Grade 5 titanium and the thread engagement length. Utilize a calibrated torque wrench for precise application. |
| Failing to adequately clean mating surfaces, potentially causing galling or premature wear. | Thoroughly clean both the screw threads and the receiving threads with a suitable solvent before installation. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and equipment, High-performance automotive assemblies, Corrosive chemical processing equipment, Marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||