Engineered from aerospace-grade Titanium Grade 5, these M22 x 101mm hex head cap screws offer exceptional strength, lightweight design, and superior corrosion resistance for critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M22 |
| Length | 101mm |
| Head Width | 20mm |
Built to exacting engineering tolerances, this M22 x 101mm hex head cap screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its high tensile strength (950 MPa minimum), excellent fatigue strength, and remarkable corrosion resistance in aggressive environments. The M22 nominal diameter combined with a 101mm length and a 20mm head width ensures robust fastening capabilities. Its low density (4.43 g/cm³) provides a significant weight advantage over steel fasteners, making it ideal for weight-sensitive applications. The inherent biocompatibility of Grade 5 titanium also makes it suitable for medical implant applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a suitable anti-seize compound if required by the application environment. 3. Tighten to the manufacturer's recommended torque specification using calibrated torque wrench, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M22 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M22 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening titanium fasteners | Always use a calibrated torque wrench and adhere to specified torque values to prevent thread stripping or fastener deformation. |
| Using standard steel tools for installation | Employ tools designed for titanium or use a protective barrier to prevent galvanic corrosion between tool and fastener. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine applications, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||