Engineered from aerospace-grade Titanium Grade 5, this M20 x 22mm hex cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance. Ideal for critical applications demanding reliability and performance.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M20 |
| Length | 22mm |
| Head Width | 20mm |
Precision-manufactured to tight tolerances, this M20 x 22mm hex head cap screw is forged from Titanium Grade 5 (Ti-6Al-4V). This alloy provides a minimum tensile strength of 950 MPa and excellent fatigue strength, making it suitable for high-stress environments. Its inherent biocompatibility and extreme corrosion resistance in various media, including saltwater and aggressive chemicals, ensure longevity and performance. The M20 nominal diameter, 22mm length, and 20mm head width are precisely controlled to facilitate secure and repeatable assembly in demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Apply a suitable lubricant or anti-seize compound to the threads to prevent galling and ensure consistent torque. 3. Tighten the M20 hex head cap screw to the manufacturer's recommended torque specification using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M20 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M20 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening leading to thread stripping or fastener fracture. | Always use a calibrated torque wrench and adhere to specified torque values for M20 Grade 5 Titanium fasteners. |
| Not using anti-seize, resulting in galling and difficult removal of titanium fasteners. | Apply a high-quality anti-seize compound specifically formulated for titanium to the threads before installation. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace and aviation structural components, Medical implants and surgical instruments, Marine and offshore hardware, High-performance automotive and racing applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||