This M20 x 14mm Nylon Hex Head Cap Screw provides exceptional corrosion resistance and dielectric properties. Engineered for reliable fastening in environments where traditional metal fasteners may fail. Its robust nylon construction ensures longevity.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M20 |
| Length | 14mm |
| Head Width | 11mm |
Built to exacting engineering tolerances, this M20 x 14mm Hex Head Cap Screw is manufactured from high-performance nylon, offering excellent resistance to a broad spectrum of chemicals and corrosive agents, making it ideal for wet or chemically aggressive environments. The material's inherent dielectric strength eliminates electrical conductivity, crucial for applications involving electrical insulation or preventing galvanic corrosion. With a nominal diameter of M20 and a length of 14mm, the screw features a head width of 11mm for secure torque application using standard hex tools. This design ensures a precise and stable connection in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating thread is clean and free from debris. 2. Hand-thread the M20 Nylon Hex Head Cap Screw to engage the initial threads. 3. Using a hex driver, tighten the screw to the required torque, avoiding overtightening to prevent stripping or material damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M20 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M20 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, which can lead to thread stripping or cracking of the screw head. | Tighten to the manufacturer's recommended torque specifications for nylon fasteners, or hand-tighten until snug for less critical applications. |
| Using the screw in applications exceeding its temperature or load-bearing limitations. | Verify the environmental conditions and mechanical requirements against the material properties of nylon before installation. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Marine environments, Electrical enclosures and insulation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||